HxR Components have partnered with Mavic to make their Easy Shift Crank more accessible to Mavic wheelset owners. Specifically, those who run Mavic wheels with the ID360 Ratchet hub engagement system. The Mavic ID360 Ratchet Locker gives those riders the option to modify their rear hub to allow gear changes while coasting. Here’s how it all works… HxR Easy Shift Crank
If you’re not familiar with the technology behind the HxR Easy Shift Crank then be sure to check out Zach’s previous post . Briefly, the Easy Shift Crank allows the rider to shift through gears while coasting. As in, you don’t need to pedal in order to change gear. A fixed rear hub and a freewheel at the crank allow this to happen.
On a fixed rear hub, as the bike rolls, the cassette, chain, chainring and cranks are concomitantly engaged. With the Easy Shift Crank freewheel, the movement of those drivetrain components is dissociated from the crank, allowing the rider to “coast” (keep the pedals level) while the chain is still tracking through the drivetrain. It’s the fixie combined with that crank-drivetrain dissociation that allows for shifting while “coasting” downhill. Mavic ID360 Ratchet Locker
The Easy Shift Crank has been around since 2016 but is now in its 3rd generation. In the early days, you could only take full advantage of the system if you ran a purpose built fixed rear hub. Not many were available for enduro bikes (with Boost spacing), but HxR offered their own 269€ […]