Need another spot to hold a couple of water bottles? Paragon Machine Works’ 2h2o bottle cage mount attaches around the steerer tube, under your stem, putting one or two bottles in easy reach.
It’s angle adjustable, so you can position them to slide out behind your handlebar and work around whatever length stem you’ve got on there. The part comes in black only for $50, with discounts available for bulk purchases. Since it uses the standard two-bolt cage mounting pattern, you can use any bottle cage you like, or attach other accessories that fit. Maximum weight limit per cage mount (i.e. per side) is 2lbs, and it’s designed for “moderate riding conditions”, so probably best if you stick with smaller bottles and don’t take it mountain biking. Long a go-to part for custom bikes and handmade frame builders, the PMW sliding dropout finally gets a fully modernized design specifically for 12mm thru axles. Much sleeker than before, the low profile design allows for all three brake rotor mounts – ISO, Post Mount for 160mm rotors, and now Flat Mount for 140mm rotors. Beyond just aesthetics, the real benefit to this new design is that braking forces are no longer able to put pressure on the sliding direction, so braking
Another improved feature is that the adjuster screws coming in from the back of the dropout now has fully captured hardware. So, even if everything came lose, you won’t lose that screw, and your wheel’s position shouldn’t change. On the drive side, […]